13
ENGENGLISH
ASSEMBLING AND PREPARING
Detaching the Stand Base
1
Stand Base
2
CAUTION
y
Lay a foam mat or soft protective cloth on the
surface to protect the screen from damage.
y
When Detaching the stand to the TV set, place the
screen facing down on a cushioned table or flat
surface to protect the screen from scratches.
NOTE
y
When Detaching the stand from TV, Detach the
stand with lifting up the lever in the direction of the
arrow.
LN41**, LN40**
Mounting on a table
1 Lift and tilt the TV into its upright position on a table.
- Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
10 cm
10 cm
10 cm
2 Connect the AC-DC Adapter and Power Cord to a
wall outlet.
CAUTION
y
Do not place the TV near or on sources of heat,
as this may result in fire or other damage.
Securing the TV to a wall
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts, or TV brackets and
bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-
bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with
a sturdy rope.
Make sure to keep the rope horizontal with the flat
surface.
To Next Page
Loading...
