16
ENG
ENGLISH
ASSEMBLING AND PREPARING
Attaching the shelf stand
Image shown may differ from your TV.
- You can use the shelf stand by putting STB (Set top
box).
LN51**
CAUTION
y
Make sure that the screws are inserted correctly and
fastened securely. (If they are not fastened securely
enough, the Stand may tilt after being installed.)
Do not use too much force and over tighten the
screws; otherwise screw may be damaged and not
tighten correctly.
7
M4 x 8
1EA
1
6
3
Stand Base
4
Screw fixing
torque
:3~5kgf
3EA
M4 x 8
NOTE
y
To install wall mount anchor, you can refer to
p.17.
NOTE
y
Remove the stand body from the TV and retighten
the screws, in the direction of the arrows.
5
P5 x 69.5
3EA
Wall Plate
2
Stand Body
To Next Page
Loading...
