38
ENG
ENGLISH
CUSTOMIZING TV SETTING
Advanced image options (Depending on model)
Setting Description
Dynamic Contrast Adjusts the contrast to keep it
at the best level according to
the brightness of the screen.
The picture is improved by
making bright parts brighter
and dark parts darker.
Dynamic Colour Adjusts screen colours so
that they look livelier, richer
and clearer. This feature
enhances hue, saturation and
luminance so that red, blue
and green white look more
vivid.
Noise Reduction Reduces screen noise without
compromising video quality.
Gamma You can adjust brightness of
dark area and middle gray
level area of the picture.
»
Low: Make the dark and
middle gray level areas
brighter.
»
Medium: Express the
original picture level.
»
High: Make the dark and
middle gray level area
darker.
Black Level Sets black level of the screen
to proper level. This function
is available in the following
modes: RF, AV or HDMI.
»
Low: The reflection of the
screen gets darker.
»
High: The reflection of the
screen gets brighter.
Motion Eye Care Adjusts screen brightness to
prevent eye glare.
Film Mode Makes video clips recorded in
film look more natural.
This feature operates only in
480i / 576i / 1080i Resolution.
Colour Gamut Advanced Control
Maximizes the utilization of
colour to increase colour
quality.
Standard: Displays standard
set of colours.
Wide: Increase number of
colours used.
Edge Enhancer Shows clearer and distinctive
yet natural edges of the video.
Basic image options
Setting Description
Backlight Adjusts the brightness of the
screen by controlling the LCD
backlight. If you decrease the
brightness level, the screen
becomes darker and the
power consumption will be
reduced without any video
signal loss.
Contrast Increases or decreases the
gradient of the video signal.
You may use Contrast when
the bright part of the picture is
saturated.
Brightness Adjusts the base level of the
signal in the picture.
Sharpness Adjusts the level of crispness
in the edges between the light
and dark areas of the picture.
The lower the level, the softer
the image.
Colour Adjusts intensity of all colours.
Tint Adjusts the balance between
red and green levels.
Colour Temperature Choose one of three
automatic colour adjustments.
Set to warm to enhance
hotter colours such as red, or
set to cool to see less intense
colours with more blue.
You can control red, green,
blue to adjust colour details.
Advanced Control Customizes the advanced
options.
Reset Restores the options of each
mode to the factory default.
To Next Page
Loading...
