LG LN54 series - Mounting on a Table; Securing the TV to a Table

11
INSTALLATION MENU
Logo Image Download
Make a ‘LG_DTV’ folder on the USB flash drive and then copy the splash image file to that folder.
y
Image shown may differ from your TV.
1
Connect the USB device to the USB IN jack on the TV.
AV
(RGB)
/DVI IN
1 2
COMPONENT
IN
RGB IN (PC)
SPEAKER
OUT
ANTENNA/
CABLE IN
OPTICAL
AUDIO OUT
AUDIO IN
(COMPONENT/RGB/DVI)
RS-232C IN
(CONTROL & SERVICE)
H/P OUT
IN 3
USB IN
PCMCIA CARD SLOT
2
Use the button to select the USB Cloning option and then press the OK button.
Installation Menu (V2.23)
LG Hotel Mode Setup
USB Cloning
Password Change
Set ID Setup
Configuration Setup
External Speaker
IR Setup
MCU Version V3.00.6
OK
USB Cloning
3
Use the button to select the Logo Image Download and press the OK button.
USB Cloning
OK
Logo Image Download
Send to USB
Receive from USB
Previous
Logo Image Download
4
Use the button to select the desired file name and press the OK button.
Logo Image Download
Image1.jpg
OK
Previous
Image2.jpg
Image3.jpg
5
Wait till the download process is completed.
After completion of download, TV set will restart automatically.
!
?
!
?
TV Software Upgrade
UPGRADING...
100%
Do not unplug!