LG LN54 series - Receive from USB

9
INSTALLATION MENU
Receive From USB
y
Image shown may differ from your TV.
1
Plug USB memory card into the USB port of the TV.
2
Use the button to select the USB Cloning option and then press the OK button.
Installation Menu (V2.23)
LG Hotel Mode Setup
USB Cloning
Password Change
Set ID Setup
Configuration Setup
External Speaker
IR Setup
MCU Version V3.00.6
OK
USB Cloning
3
Use the button to select the Receive from USB and press the OK button.
y
Below explains the naming rules for .TTL files.
The supported model line will be in the name of the file but the screen size will be listed as “xx”.
This allows TVs having the same chassis model number to use the same ‘*.TTL’ file without regard to the screen
size.
ex) The name of ‘*.TTL’ file is ‘xxLP360H-TA00000.TLL’ for 32/42LP360C model.
USB Cloning
OK
Logo Image Download
Send to USB
Receive from USB
Previous
Receive from USB
4
Use the button to select the desired *.TTL files name and press the OK button.
Receive from USB
xxLP360H-TA00001.TLL
OK
Previous
xxLP360H-TA00002.TLL
xxLP360H-TA00003.TLL
5
The TV is changed to Standby mode after a successful download.
If the download failed, the TV will changed to the initial installation screen.