Garden Hose Installation for Dehumidifying (Dry Mode Only)
1. Remove the drain plug when using the Dry (dehumidifying) mode.
2. Install a 5/8” (16 mm) inside diameter garden hose (not provided) into the continuous drain port
and place the open end of the hose over a floor drain or bucket.
NOTE
• Install the garden hose when you need dehumidification in high humidity.
• This product has a self-evaporative system. The condensing water will be recycled to cool the
condenser.
This not only improves cooling efficiency, but also saves energy for you.
INSTALLATION
16
To Next Page
Loading...
Need help?
General
