ENGLISH
13
OVERVIEW
CONTROL PANEL OVERVIEW
HS (Hot Surface) Indicator
The HS indicator will appear in the display once the element is turned o or during the self clean cycle. The HS indicator will
stay on until the surface has cooled to approximately 150˚F/66˚C or when the self clean cycle ends.
PF (Power Failure) / Flashing Time
Depending on the model of your range, the display will either show “PF” or a ashing clock. This means that the product has
just been plugged in, or that it has experienced a power interruption. To clear the “PF” message, press the “On/O” button
on the cooktop controls and the “Clear/O” button on the oven controls. If your oven displays a ashing clock, then press
the “Clock” button and reset the time, or press any button to stop ashing.
For Model: LRE3027
For Model: LRE3085
For Model: LRE3083
For Model: LRE3021
Cooktop Element Control
Features
Oven Controls
Number Buttons
Start/Lockout
Button
Clear O
Button
Warming
Drawer
Button
To Next Page
Loading...
Need help?
General
