How to level LG Ranges?
To ensure your LG Range is level, place an oven rack in the center of the oven and put a level on the rack. Adjust the leveling legs at the base of the range until the rack is level. Make sure the floor is level, strong, and stable enough to support the range. If the floor is sagging or sloping, contact a carpenter. Also, check that the kitchen cabinets are square and provide enough clearance for the range.
Why is my LG Electric range clock and timer not working?
If the clock and timer on your LG electric range are not working, it is likely due to a power outage. Verify power is present at the unit and that the circuit breaker is not tripped. Replace the household fuse, but do not increase fuse capacity. Refer to the owner’s manual for instructions.
What to do if LG Electric range timer will not accept programming?
If the electronic timer on your LG electric range will not accept programming, it is caused by a failed main power control board. Replace the power control board (PCB).
What to do if my LG Ranges oven control displays PF or HS message?
If the oven control of your LG Range displays a PF message, it means there was a power interruption. To clear it, press the CLEAR/OFF control pad and reset the clock to the correct time. If it displays an HS message, press the ON/OFF pad. For incomplete service wiring, contact your appliance servicer. In case of a power outage, check your house lights and call your local electric company.
Why my LG Ranges oven will not work?
If your LG Range oven won't work, first ensure the electrical plug is fully inserted into a live, properly grounded outlet. Also, check if a fuse in your home is blown or the circuit breaker tripped, and replace the fuse or reset the circuit breaker if needed. Refer to the Using the oven section for proper oven control settings.
What to do if CLEAN flashes in the display of my LG LRE30451ST Ranges?
If the CLEAN message is flashing on your LG Range display, it could be because the self-clean cycle was selected but the door isn't closed. Make sure to close the oven door. Alternatively, the oven door might be locked because the temperature inside is still too high. Press the CLEAR/OFF pad and allow the oven to cool down.
What to do if LG Electric range is overheating?
If your LG electric range is overheating, it could be due to loose or bad wiring to the latch system, a defective oven sensor, or a bad power control board (PCB). You can try repairing or replacing the wiring, testing and/or replacing the oven sensor, or testing and/or replacing the PCB.
What to do if my LG Electric range oven does not bake?
If your LG electric range isn't baking, the issue could stem from loose or bad wiring, a defective bake element, a defective electronic clock, or a door switch sensing error. Check and tighten all wiring connections, replacing any broken wires. Test or replace the bake element. Replace the power control board (PCB) if the electronic clock is faulty. Also, test the door switch and inspect the contact point between the door and the door switch.
What to do if my LG Electric range oven door will not open?
If your LG electric range oven door won't open, it could be due to a defective latch mechanism, a defective or bent door latch lever, or the oven is still hot after a self-clean cycle. Try replacing the door latch system or the latch lever. If the oven is still hot, wait until the LOCK icon goes out, as this is normal during the cool-down period after a self-clean cycle.
Why is my LG Electric range smoking excessively during self-clean?
Excessive smoking during a self-clean cycle of your LG electric range is likely due to excessive soil. To resolve this, press the CLEAR/OFF pad, open the windows to rid the room of smoke, wait until the Self Clean cycle is cancelled, wipe up the excess soil, and reset the clean.
To Next Page
General
