12
INSTALLATION
ENGLISH
Tools Needed
Parts Provided
Phillips screwdriver
Level
Template (1)
Parts not Provided
Strain relief
(For conduit
Installations only)
Anti-tip bracket kit (1)
Anchor sleeves (4) Lag bolts (4)
Flat-blade screwdriver
Adjustable wrench
1
/
4
" Nut driver
Drill
Pliers
Safety glasses
Tape measure
Gloves
NOTE
Observe all governing codes and ordinances.
Have the installer show you the location of the circuit breaker or fuse. Mark it for easy reference.
As when using any appliance generating heat, there are certain safety precautions you should follow .
3-Wire cord
Before Installing the Range
WARNING
Tip - Over Hazard
Caution, possibility of tilting Anti-tip restraints
A child or adult can tip the range and be killed. Verify
the anti-tip bracket has been installed. Ensure the
anti-tip bracket is engaged when the range is moved.
Do not operate the range without the anti-tip bracket
in place. Failure to follow these instructions can result
in death or serious burns to children and adults.
In order to prevent tipping of the appliance, this
stabilising means must be installed.
To check that leveling leg is inserted into anti-tip bracket, grasp the
top rear edge of the range and carefully attempt to tilt it forward.
Anti-tip bracket
Leveling leg
If you did not receive an anti-tip bracket with your purchase, call 920005498 or 920004123 to receive one at no cost.
WARNING
The information in this manual should be followed exactly. Failure to do so may result in fire, electrical
shock, property damage, personal injury, or death.
Wear gloves during the installation procedure. Failure to do so can result in bodily injury.
To Next Page
Loading...
Need help?
General
