To remove crisper door flap:
1. Raise the door flap as high as it will open.
2. Press the plastic hinge toward the center of the door
flap with your finger.
3. Lift the door out of its place.
4. To replace, reverse above procedure.
To remove the glass:
1. Lift up the glass after inserting a finger into a hole
under the crisper cover.
2. Pull the glass up and out.
CRISPER COVER WITH LATTICE ON INNER
SURFACE
To remove the lattice on inner surface:
1. Remove crisper cover (as illustrated above).
2. Hold the glass cover and turn the crisper cover over.
3. For each lattice hold lattice and pull sides of the cover
outward to remove lattice.
To replace lattice on inner surface:
1. For each lattice insert middle tab in 1 (closed to glass
cover)and pull sides of the cover to insert lattice.
USING YOUR REFRIGERATOR
20
To Next Page
Loading...
Need help?
General
