GLIDE N SERVE
The Glide N Serve provides storage space with a variable
temperature control that keeps the compartment colder than
refrigerator temperature. The drawer also features a self-
opening lid that opens whenever the drawer is pulled open.
This drawer can be used for large party trays, deli items,
or beverages.
Controls
The control regulates the air temperature in the drawer.
Set control level to cold to provide normal refrigerator
temperature. Use the colder setting for meats or other deli
items.
NOTE: Cold air directed to the Glide N Serve can
decrease refrigerator temperature. Refrigerator
control may need to be adjusted.
To remove Glide N Serve:
1. Pull drawer out to full extension.
2. Tilt up the front and pull straight out.
To replace Glide N Serve:
1. Push metal rails to the back of the refrigerator.
2. Place drawer onto rails and slide drawer back until it
falls into place.
Food storage guide in Glide N Serve
NOTE: DO NOT store lettuce or other leafy produce in
this drawer.
w WARNING: Fruits and vegetables may be damaged at
the coldest setting.
w CAUTION: DO NOT store bottles. If they are frozen,
they can be broken and cause personal injury.
DESIGN-A-DOOR
The door bins are removable for easy cleaning and
adjusting.
1. To remove the bin, simply lift the bin up and pull
straight out.
2. To replace the bin, slide it in above the desired support
button and push down until it stops.
w WARNING: Somebody can be hurt if door bins are not
firmly assembled.
w NOTE: DO NOT adjust a bin that is loaded with food.
w CAUTION: DO NOT allow children to play with
baskets. Sharp corners on baskets could cause injury.
USING YOUR REFRIGERATOR
21
To Next Page
Loading...
Need help?
General
