28
OPERATION
Model LRGL5823*
1
Press and hold the Start Time button for 3
seconds.
2
Press Start Time repeatedly until Auto appears
in the display.
3
Press +/– button to switch Auto Conversion on/
off.
4
Press Start to accept the change.
Adjusting the Oven Thermostat
This oven may cook differently from the one it
replaced. Use the oven for a few weeks to become
more familiar with it before changing the temperature
settings. After becoming more familiar with the oven,
if you notice a pattern of over- or underheating, follow
these steps to adjust the thermostat.
NOTE
To begin, either raise or lower the thermostat
15 °F (8 °C). Try the oven with the new setting. If
the oven still needs adjustment, raise or lower the
thermostat again, using the first adjustment as a
gauge. For example, if the adjustment was too
much, raise or lower the thermostat 10 °F (5 °C).
If the adjustment was not enough, raise or lower
the thermostat 20 °F (12 °C). Proceed in this way
until the oven is adjusted to your satisfaction.
Model LRGL5825*
1
Press Settings repeatedly until AdJU appears in
the display.
2
Use the number keys to enter the number
of degrees you want to adjust the oven
temperature.
Press Settings again to add a minus sign if
decreasing the temperature.
3
Press Start to accept the change.
Model LRGL5823* / LRGL5821*
1
Model LRGL5823*
Press and hold the Start Time button for 3
seconds. Press Start Time repeatedly until
AdJU appears in the display.
Model LRGL5821*
Press Settings repeatedly until AdJU appears in
the display.
2
Set the number of degrees to adjust:
Press or press and hold the +/– buttons until
the desired number of degrees appears in the
display.
Press Settings again to add a minus sign if
decreasing the temperature.
3
Press Start to accept the change.
NOTE
%
This adjustment does not affect the broiling.
The adjustment is retained in memory after
a power failure. The oven thermostat can be
increased (+) or decreased (-) as much as 35
°F or 19 °C.
%
Once the thermostat is increased or decreased,
the display shows the adjusted temperature
until it readjusts.
Turning the Preheat Alarm Light On/Off
When the oven reaches its set temperature, the
preheating alarm light flashes 5 times or until the
oven door is opened.
You can activate or deactivate the preheating alarm
light.
Model LRGL5825*
1
Press Settings repeatedly until PrE appears in
the display.
2
Press 1 to turn the light on/off.
3
Press Start to accept the change.
Model LRGL5823* / LRGL5821*
1
Model LRGL5823*
Press and hold the Start Time button for 3
seconds. Press Start Time repeatedly until PrE
appears in the display.
Model LRGL5821*
Press Settings repeatedly until PrE appears in
the display.
2
Press +/– to turn the light on/off.
3
Press Start to accept the change.
To Next Page
Loading...
Need help?
General
