58
LIMITED WARRANTY
Not Covered by this Limited Warranty
Problem Cause Prevention
%
Cooktop enamel
chipping off
Improper usage
%
Do not hit enamel cooktop
%
Burners do not light Clogged or dirty burner ports or electrodes will
not allow the burner to operate properly
%
Check and clean the gas
electrode.
OK Not working
Must be cleaned
%
Uneven flame 1. Improper burner cap installation
%
Check installation of burner
head and cap
Burner cap is
properly seated.
Burner cap is NOT
properly seated.
2. Burner ports clogged by food residue
%
Hardened residue should be
removed using a toothbrush.
Ports blocked by dirt Flames uneven
%
Burner cap color
changes and
becomes dull
1. Scratching
2. Use of detergent or abrasive cleansers
%
Do not use steel wool or
abrasive cleansers to clean.
%
To remove burnt-on food,
soak the burner heads in hot
water for 20–30 minutes. (Do
not use detergent)
Shine is lost