• The information is available through “https://gsfs-america.lge.com” with a valid ID.
• The information is intended tor experienced technicians, not for customer .
• The information is subject to change or update without notice.
LG(61)-FO-DI-008.05
How to check for defect How to repair
1- Check the display in Freezer door
to determine Ice Maker status. Ice
On/Off. Press and hold for 3 seconds to change
status.
1- Change cover display if status will not
change.
2- Check the Freezer Temperature near the Ice
Maker area. It should be between 0-5 degrees
Fahrenheit. The Ice Maker cannot produce ice
without having the proper temperature.
2- Determine the reason for improper cooling
and correct.
3- Wiring connectors at the top of the Freezer
door improperly assembled.
3- Connect and disconnect harness and be sure
it is OK.
4- Ice maker does not operate due to improper
wiring connection.
4- Connect harness and be sure it is OK.
Repair Instructions
• The information is available through “https://gsfsplus-america.lge.com” with a valid ID.
• The information is intended for experienced technicians, not for customer .
• The information is subject to change or update without notice.
To Next Page
Loading...
Need help?
General
