LG LS-E0960CL - Control Box and Discharge Grille Removal; Evaporator Removal

- 40 -
Copyright ©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
2. To remove the Control Box.
• Remove 2 or 4 securing screws.
• Pull the control box out from the chassis
carefully.
3. To remove the Discharge Grille.
• Remove the securing screw.
• Pressing the right side of the discharge grille
downward slightly, unhook the discharge grille.
• Pull the discharge grille out from the chassis
carefully.
• Unhook the left side of the discharge grille and
pull the discharge grille out from the chassis
carefully(only LS-J series)
4. To remove the Evaporator.
• Remove 3 screws securing the evaporator(at the
left 1EA, at the right 2EA).
• Remove 3 screws securing the evaporator (at the
left 2 EA, in the Eva Holder, at the right 1EA):
only LS-J series