Operating Instruction
Sl p m ie1 Press the Sleep Mode Auto button to set the time you '_ntthe unit to stop automatica/y.
2 The T_meris programmed in one-hour incremen_ by pressing _e, Sleep Mode Auto button 1 to 7 _mes, The
sleep mode is avalable for 1to 7 times, To alter the time period in steps of 1 hour, press the Sleep Mode
Button whte _ming at air conditioner,
,3 Make surethe Sleep Mode Auto LED/ghts up.
To cancel the Sleep Mode, press the s_eepMode Auto button several times until the st_(_)
disappears from the operaton display,
_e Sleeip Mode wll _ operated _ slow _ _e_ (cooing) o,rmedium fan s_ed (heat pump only) for
a comfortable sleep,
In cooling m_de or healthy dehumidification modle:
Thesettingtemperaturewi/automatically ri_ by 1°C(2°F) over the next 30 minutesand by 2°C(4° F}in 1 hourfor a
comfod_blesleep.
tting the time
1 Time can be set only when you press the Reset button. Whee you replace the batteries,
you should press the reset buttons to reset the time. Press _e Sta_Stop bu_on
2oPress 2rid F button _d check if 2nd F ic_onis on.
43PressPressthetheTimerTimeSettingSETbutton.bUt°ns_"_¢_un_l_e desired time is set.
Check the indicator for A.M or P.M.
Delay start/Pre-set stop,
1 Make sure _e time is set ,correctlyon the display of _e Femotec_n_o/er
2 Press 2nd F button
3 Press the ON/OFF Timer buttons to _rn Timer on or off, _L_
4 Press the Time Setting buttons until _e desired time is set, _°
5,,TOset the,selected time, press the Timer setting button aiming the remote co_troHerat the
signal r_eptor,,
To,cancel the l:ime_sortie#
Check if 2rid F icon is off _:_
Pros _e Timer Cancel button aiming the remote _ntro/er at the signal receptor.
(Thetimer lamp on the air conditioner and the display wi/go out)
_lect one of the f,olowing fourtypesof ,o_tation,
........................................L-,= f_.J
Del_ OFF Timer Delay ON Timer De_ayOFF and ON Timer Delay ON and OFF Timer
Room Air Conditioner
To Next Page
Loading...
