Need help?Do you have a question about the LG LSU120HEV2 and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Type | Split System |
| Cooling Capacity | 12000 BTU/h |
| Heating Capacity | 13000 BTU/h |
| Operating Temperature (Cooling) | 18°C to 43°C |
Covers electrical safety during wiring procedures.
Guidelines for choosing optimal outdoor unit placement.
Specifies minimum clearances for airflow and service access.
Guidelines for selecting indoor unit placement and required spacing.
Discusses safety standards for refrigerants and concentration limits.
Overview of connection methods for refrigerant piping.
Detailed steps for connecting piping to the outdoor unit.
Guidelines for correctly insulating all refrigerant piping.
Electrical safety precautions and general connection guidelines.
Detailed steps for connecting power and communication cables.
Steps for connecting electrical wiring to HXV indoor units.
Steps for connecting electrical wiring to HEV2 indoor units.
Steps for connecting electrical wiring to the outdoor unit.
Procedure for performing a leak and pressure test on refrigerant piping.
Continues leak testing and details deep evacuation steps.
Detailed steps for performing deep evacuation.
Detailed steps for conducting the triple evacuation test.
Describes the triple evacuation procedure as a best practice.
Adding refrigerant and completing final installation tasks.
Installing batteries, performing a test run, and evaluating performance.
Procedure for collecting refrigerant into the outdoor unit.
Introduction to LG SIMS app for monitoring and troubleshooting.
Explains how error codes are displayed and their meaning.
To Next Page
