Need help?Do you have a question about the LG LW6015ER and is the answer not in the manual?
General| Type | Window Air Conditioner |
|---|---|
| Cooling Capacity | 6, 000 BTU |
| Room Size Coverage | Up to 260 sq. ft. |
| Noise Level | 52 dB |
| Power Supply | 115V / 60Hz |
| Operating Frequency | 60 Hz |
| Fan Speed Settings | 3 |
| Refrigerant | R410A |
Safety guidelines regarding power cords, plugs, grounding, modification, unpacking, and storing flammables.
Safety guidelines for operating the unit, including power cords, sharing outlets, water, cleaning, and unplugging.
Further safety warnings about operation, unplugging, wet hands, gas leaks, and touching metal parts.
Guidance on installing the product considering neighbors and following instructions precisely.
Steps to prepare for operation, including installation, power, circuit, and cord checks.
Guidelines for proper usage, including airflow exposure, oxygen depletion, and special purposes.
Instructions for cleaning and maintenance, including handling metal parts, water use, and power safety.
Information on contacting authorized service centers for repair and maintenance.
Explains symbols used in the manual for warnings and notices.
Overview of the appliance's features and installation compliance.
Details on electrical specs, plug testing, receptacle types, and power supply needs.
Critical safety warnings about the plug, chemicals, cord shields, and tamper-resistant parts.
Guidance on not modifying the plug and handling disconnection scenarios.
Discourages extension cords and specifies requirements if used.
Lists and illustrates various screws, seals, brackets, and panels for installation.
Lists essential tools needed for the installation process.
Specifies the window size range and vertical opening needed for installation.
Explains proper clearance for cooling efficiency and condensation drainage.
Instructions for inserting guide panels and fastening curtains.
Steps for cutting and attaching the adhesive-backed seal strip to the window.
Instructions for installing L brackets for unit support.
Details on positioning the unit, ensuring levelness, and securing it in the window.
Instructions for securing guide panels and installing sash seals and locks.
Guidance on attaching a locking bracket for window security.
Steps for attaching the support bracket to the inner window sill.
Final steps for completing unit installation and referencing electrical data.
Details on using the POWER, FAN SPEED, TIMER, and MODE buttons on the remote.
How to control temperature settings and reset the filter indicator.
Information on Auto Restart, Energy Saver mode, and remote sensor.
Step-by-step guide for inserting the battery into the remote control.
How to adjust airflow direction using the horizontal deflector.
Instructions for drain pipe usage and explanation of the slinger fan's role.
Steps for checking and cleaning the air filter, front grille, inlet grille, and cabinet.
Importance of checking condenser coils for continued peak efficiency.
Detailed steps for safely removing the unit from the window.
General advice on troubleshooting before contacting service.
Steps to diagnose unit not operating or insufficient cooling.
Explains water drip from rear and identifies normal operating sounds.
To Next Page
