Installation
26 Ventilator
Accessory Model
• In the menu screen, press [<,>(left/right)] button to select the setting category, and press
[∧(up)] button for 3 seconds to enter the password input screen for the installer setting.
• Input the password and press [OK] button to move to the installer setting list.
h Installer setting password
Main screen → menu → setting → service → RMC version information → SW Version
Example) SW version : 1.00.1 a
In the above case, the password is 1001.
OK OK
•
Some categories of the menu may not be displayed according to the function of the
product, or the menu name may be different.
• For more details, refer to the remote controller manual.
To Next Page
Loading...
