Safety precautions
Installation manual 9
ENGLISH
1. Contact an installation specialist for installation.
2. Plug in the power plug properly.
3. Use a dedicated circuit.
4. Do not use an extension cord.
5. Do not start/stop operation by plugging/unplugging the power cord.
6. If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
1. For repair and maintenance, contact your authorized service dealer.
2. The appliance shall be disconnected from its power source during service and when
replacing parts
• It should be installed by installation specialist.
• The wireless router must be installed within 10m.
• Install in a space without EMI interference. It may cause malfunction of the product.
• If there is a wall or obstacle between the Wi-Fi modem and the wireless AP, the
communication may not be smooth.
• If it is attached to a steel structure such as an H-beam, steel plate, indoor unit cabinet,
etc., the communication may not be smooth.
• Use a 10m extension cable (sold separately) according to the installation situation, but
do not connect additionally exceeding 10m.
• Install in a place 1cm or more away from a metal panel.
Precautions for installing a Wi-Fi modem
Service
Preparing for operation
To Next Page
Loading...
