Safety Precautions
Installation Manual 7
ENGLISH
Keep level even when
installing the prod-
uct.
• To avoid vibration or
water leakage.
Use two or more peo-
ple to lift and trans-
port the product.
• Avoid personal injury.
Do not install the
product where it will
be exposed to sea
wind (salt spray)
directly.
• It may cause corrosion
on the product. Corro-
sion, particularly on the
condenser and evapora-
tor fins, could cause
product malfunction or
inefficient operation.
Use a soft cloth to
clean. Do not use
harsh detergents, wax
or thinner, etc.
• Otherwise, color or sur-
face of the oroduct mav
deteriorate.
Clean the filter and the
heat exchanger regu-
larly and use the
gloves for cleaning.
• Adhering to a mass of
dust may cause the
deterioration of air vol-
ume.
Do not use the prod-
uct for special purpos-
es, such as preserving
foods, works of art,
etc. It is a consumer
ventilator, not a preci-
sion refrigeration sys-
tem.
• There is risk of damage
or loss of property.
n Operation
Do not block the inlet or outlet of
air flow.
• It may cause product failure.
Do not step on or put anyting on
the product.
• There is risk of personal injury and
failure of product.
Do not install the ventilation unit alone for controlling room temperature.
• If this is needed, install with another Indoor unit (air conditioner).
To Next Page
Loading...
