30
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
DIGITAL AUDIO OUT SETUP
Connect one end of an optical cable to the TV Digital Audio (Optical) Output port.
Connect the other end of the optical cable to the digital audio (Optical) input on the audio equipment.
Set the “TV Speaker option - Off ” in the AUDIO menu. (► P. 92)
Refer to the external audio equipment instruction manual for operation.
1
2
3
CAUTION
►Do not look into the optical output port. Looking at the laser beam may damage your vision.
Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.
If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT
terminal on the back of TV to a Home Theater (or amp).
1
2
To Next Page
Loading...
