LG M2901S - Adjusting UTILITY Settings

20
Adjusting UTILITY
User Menus
*If Network Select is set to Serial, DHCP and Manual are disabled.
Wait for IP Setup
IP Setup Completed
Factory Reset Select this option to return to the default factory settings.
MANUAL SETTING
◄► Move
IP Address
Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Execute
192. 168. 000 .010
255. 255. 255. 000
192. 168. 000. 001
192. 168. 000. 001
192. 168. 000. 001
>
Select
Back
MENU
▲
▼
• Network Select : Sets up network connections.
- RS-232 : Enable communication via Serial.
- LAN : Enable communication via Ethernet.
• DHCP : Allocates and sets up IP automatically.
• Manual : Sets up IP address, Gateway, Subnet Mask, Primary DNS and Secondary DNS.
The setup process is complete when you select Execute, and "IP Setup
Completed" is displayed at the bottom of the screen. While "Wait for IP Setup" is
displayed, you cannot use the local keys and remote control. "Wait for IP Setup" is
displayed for up to 40seconds.
NETWORK SETUP
◄► Move
LAN
>
>
Network Select
DHCP
Manual
Select
Back
MENU
▲
▼