LG M4214C - Page 82

Controlling the Multiple Product
RS-232C
A28
45. Power saving(Command : f I)
► To set the Power saving mode.
Transmission
Data 0 : Off
1: (static level 1)
2: (static level 2)
3: (static level 3)
Acknowledgement
Transmission / Receiving Protocol
46. Power Indicator (Command : f o)
► To set the LED for Power Indicator
Transmission
Data 0 : Off
1: On
Acknowledgement
[f][I][][Set ID][][Data][Cr]
[f][o][][Set ID][][Data][Cr]
[o][][Set ID][][OK/NG][Data][x]
[I][][Set ID][][OK/NG][Data][x]