LG M4714C - Page 42

e -Fo ]uc
Transmission / Receiving Protocol
01. Power(Command : a)
• To control Power On/Off of the Set.
Transmission
] [k][a][ ][Set Ig][ ][Data][Cr] I
Data 0 : Power Off 1 : Power On
Acknowledgement
] [a][ ][Set ID][ ][OK][Data][x] I
• To show the status of Power On/Off.
Transmission
] [k][a][ ][Set ID][ ][FF][Cr] ]
Acknowledgement
] [a][ ][Set ID][ ][OK][Data][x] I
Data 0 • Power Off 1 • Power On
02. Input Select (Command : b) (Main Picture Input)
• To select input source for the Set.
You can also select an input source using the INPUT
button on the remote control.
Transmission
I [k][b][ ][Set ID][ ][Data][Cr] I
Data 2
4
5
7
8
9
: AV
: Component 1
: Component 2
: RGB (PC)
: HDMi (DTV)
: HDMI (PC)
Acknowledgement
] [b][ ][Set ID][ ][OK][Data][x] I
Data 2 : AV
4 : Component 1
5 : Component 2
7 : RGB (PC)
8 : HDMI (DTV)
9: HDMI (PC)