%
@ Transmission / Receiving Protocol
07. Contrast(Command : g)
• To adjust screen contrast.
You can also adjust the contrast in the Picture menu.
Transmission
I [k][g][ ][Set ID][ ][Data][Cr] I
Data Min : 00H - Max" 64H
• Refer to 'Real data mapping' as shown below.
Acknowledgement
I [g][][Set ID][ ][OK][Data][x] I
* Real data mapping
0 Step 0
A
F
10
64
Step 10
Step 15
Step 16
Step 100
08. Brightness(Command : h)
• To adjust screen brightness.
You can also adjust the brightness in the Picture menu.
Transmission
I [k][h][ ][Set ID][ ][Data][Cr] I
Data Min : 00H - Max : 64H
• Refer to 'Real data mapping' as shown below.
Acknowledgement
J [h][ ][Set ID][ ][OK][Data][x] I
* Real data mapping
0 : Step
A Step 10
F Step 15
10 Step 16
64 Step 100
To Next Page
Loading...
