17
OPERATION
ENGLISH
- You hear 2 beeps and the indicator light
pulses 4 times.
• The product will automatically restart without
the need to press any buttons.
• Upon restart, the fan will initially operate at a low
speed until the compressor starts, 2 1/2 to 3
minutes later. Once the compressor starts, the
fan will resume its previous setting.
Fan Speed and Cooling Capacity
The cooling capacity indicated in the specification is
the value when the fan speed is set to high, and the
capacity will be lower at low or medium fan speed.
High fan speed is recommended when you wish to
cool the room quickly.
Preparing before
Operation
Inserting the Batteries into the
Wireless Remote Control
Insert AAA (1.5 V) batteries into the wireless remote
control.
1
Remove the battery cover and insert the new
batteries, making sure that the + and –
terminals of the batteries are oriented
correctly.
2
Reattach the cover by sliding it back into
position.
• When the wireless remote control display begins
to fade, replace the AAA (1.5 V) batteries.
• If the system is not going to be used for a long
time, remove the batteries to save their working
life.
• Do not use old and new batteries together.
Installing the Remote Control
Holder
1
Choose a suitable place where its safe and easy
to reach.
2
Fix the firmly to the wall with the supplied
screws.
3
Slide the remote controller inside the holder.
To Next Page
Loading...
