18
OPERATION
• The remote controller should never be exposed
to direct sunlight.
• The signal transmitter and receiver should
always be clean for proper communication. Use
a soft cloth to clean them.
• If other appliances are accidentally affected by
the remote controller, change their position or
consult your serviceman.
Setting the Current Time on the
Wireless Remote Control
1
Insert the batteries.
• The time flashes at the bottom of the display
screen.
2
Press the
e
or
f
button to set the current
time.
3
Press the
SET/CANCEL
button to stop the
flashing.
• The
On Timer
and
Off Timer
are available after
setting the current time.
• If you have already inserted the battery, reinsert
it or use the reset button to set the current time.
Selecting Fahrenheit or Celsius
Set the temperature display to show either
Fahrenheit (
8
) or Celsius (
7
) units.
1
Turn the appliance on.
2
Press and hold the
SWING
(Up-Down Swing)
button for about 5 seconds to change units
between
7
and
8
.
To Next Page
Loading...
