23
OPERATION
ENGLISH
Using Wireless Remote
Control
Operating with the Wireless
Remote Control
Point the wireless remote control towards the
signal receiver at the right side of the appliance to
operate it.
• The wireless remote control may operate other
electronic devices if it is directed towards them.
Make sure to point the wireless remote control
towards the appliance signal receiver.
• For proper operation, use a soft cloth to clean
the signal transmitter and receiver.
• If a function included on the remote is not
supported on the appliance, the appliance may
not indicate this by buzzing. Exceptions include
the
Adjusting the Left-Right Direction
,
Energy
Display
and
Air Purification
functions.
Cooling, Auto,
Dehumidification, Heating, Fan
Mode
You can change the operating mode when the
appliance is turned on.
1
Turn the appliance on.
2
Press the
MODE
button repeatedly to select
the desired mode.
3
Press the
a
or
b
button to set the desired
temperature.
• Cooling Mode: Set the temperature from 18
\
(64 ℉) to 30
\
(86 ℉).
• Heating Mode: Set the temperature from 16
\
(60 ℉) to 30
\
(86 ℉).
• Auto Mode: Set the temperature from 18
\
(64 ℉) to 30
\
(86 ℉).
Icon Description
Cooling Mode
Cool air blows from the air outlets.
Auto Mode
The product adjusts the airflow
automatically.
Dehumidification Mode
This function removes moisture in
indoor air.
Heating Mode
Warm air blows from the air
outlets.
Fan Mode
This function circulates the air
without heating or cooling it.
To Next Page
Loading...
