EasyManua.ls Logo

LG MA12R - Page 24

LG MA12R
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
OPERATION
Dehumidification, Fan Mode: There is no
temperature control.
NOTE
Each press increses or decreases the
temperature by 1
\
or 1 .
Notes for Each Operation Mode
Cooling Mode
The cooling mode doesn't work if desired
temperature is higher than room temperature.
- If so, please lower the desired temperature.
- 5
\
is proper for the difference between
room and outside temperature.
- When setting the desired temperature higher
than room temperature, only ventilation wind
is blow out instead of cooling wind.
Heating Mode
The heating mode doesn't work if desired
temperature is lower than room temperature.
- If so, please increase the desired temperature.
- 5
\
is proper for the difference between
room and outside temperature.
- When setting the desired temperature lower
than room temperature, only ventilation wind
is blow out instead of cooling wind.
Heating mode doesn't operate at cooling
exclusive model.
Dehumidification Mode
In rainy season or high humidity climate, it is
possible to operate simultaneously dehumidifier
and cooling mode to remove humidity
effectively.
Auto Mode
You can use the
FAN SPEED
button during the
auto mode.
You can change other operation mode manually
during the auto mode.
Fan Mode
When running ventilation, compressor of AHU
doesn't work.
Ventilation mode does not release cool wind but
general fan.
- Because it releases the wind that has no
temperature difference from the room, it
functions to circulate the inside air.
Natural wind based on chaos logic
- For a fresher feeling than other fan speeds,
press the Indoor Fan Speed Selector and set to
chaos mode. In this mode, the wind blows like
a natural breeze by automatically changing
fan speed based on the chaos logic.
During Fan Mode
- The outdoor compressor doesn’t work. Have a
function to circulate the indoor as it sends out
the air that doesn’t have much temperature
difference with indoor.
Jet Mode
Use this mode to change the room temperature
more quickly.
1
Turn the appliance on.
2
Press the
MODE
button repeatedly to select
the desired mode.
• The
Jet
mode is available with
Cooling
,
Heating
and
Dehumidification
modes.

Related product manuals