28
OPERATION
2
Press the
SET/CANCEL
button to cancel the
setting.
Cancelling the Timer Setting
• Press the
CANCEL
button to cancel all timer
settings.
Sleep Function (On Some
Models)
You can set the appliance to turn off automatically
after a set time. The appliance will automatically
change the temperature and fan speed.
This function can be set when the appliance is
turned on.
1
Turn the appliance on.
2
Press the
TIMER
button repeatedly.
• The icon below flashes at the bottom of the
display screen.
3
Press the
f
or
e
button to set the desired
time.
• The time can be set up to 7 hours.
4
Press the
SET/CANCEL
button to stop the icon
from flashing.
• The
Sleep
function icon is displayed on the
display screen.
•
1H
is displayed on some indoor units.
• Indoor unit display shows the set time from 1H
to 7H for only 5 seconds and then returns to the
set temperature.
• In the
Cooling
and
Dehumidification
mode, the
temperature increases by 1
8
(1
7
) after 30
minutes and an additional 1
8
(1
7
) after
another 30 minutes for a more comfortable
sleep. The temperature increases up to 2
8
(2
7
) from the preset temperature.
• Although the remark for fan speed on the
display screen may be changed, the fan speed is
adjusted automatically.
To Next Page
Loading...
