29
OPERATION
ENGLISH
Light Off Function (On Some
Models)
You can set the brightness of the indoor unit
display screen.
• Press the
LIGHT OFF
button.
• The button turns the display screen on or off.
• If the brightness of an indoor unit's display is set
to off, pressing a button on the wireless remote
control automatically turns the display on for a
while.
• This function may operate differently depending
on the model.
Energy Saving Function (On
Some Models)
You can minimize power consumption during
Cooling and increases the set temperature to the
optimal level for a more comfortable environment.
• The temperature automatically returns to 72
8
(22
7
) if the desired temperature is set lower
than that. If the temperature is set higher than
72
8
(22
7
), the set temperature remains as set.
1
Turn the appliance on.
2
Press the
MODE
button repeatedly to select
the
Cooling
mode.
3
Press the
ENERGY SAVING
button
•
8O
,
6O
,
4O
or
L
(1step),
LL
(2step) is displayed on
some indoor units.
• This function is available with
Cooling
mode.
• Capacity may decrease when the
Energy Saving
function is selected.
• The desired temperature is displayed for about 5
seconds if you press the
FAN SPEED
,
a
or
b
button.
• The room temperature is displayed for about 5
seconds if you press the
ROOM TEMP
(Room
Temperature)
button.
Checking Room Temperature
Check the current room temperature.
To Next Page
Loading...
