LG MASTER-K10S1 - User Manual

User’s Manual
LG Programmable Logic Controller
MASTER-K10S1
LG Industrial Systems Co., Ltd.
702004000
Warranty
• LGIS provides an 18 months warranty from the date of production.
• For troubles within the warranty period, LGIS will replace the entire
PLC or repair the troubled parts free of charge except the following
cases;
① the troubles caused by improper treatment or operation.
② the troubles caused by external devices.
③ the troubles caused by remodeling or repairing based on user’s
own discretion.
④ the troubles caused by natural disaster.
• This warranty is limited to the PLC itself only. It is not valid for the
whole system which the PLC is attached.
Installation Environment
1. Please avoid installing the PLC at following locations where;
2. Please install the PLC at least 50㎜ away from a duct or other devices.
3. Be sure to install the PLC in the cabinet which comply with IP54 or higher.
4. Be sure to place the PLC in the manufacturer’s original packing
while shipping or storing.
• temperature may experience ambient drops or rising.
(It should stay within 0℃ to 55℃(32 ~ 131℉))
• condensation may occur due to abrupt temperature changes.
• vibration and shock are directly transmitted to the PLC.
• the PLC is exposed to the direct rays of the sun.
• the PLC is exposed to corrosive or inflammable gas.
• the PLC is exposed to conductive powder.

Summary

Installation Environment

Warranty Information

Product Characteristics

PLC Power Supply

Specifications

General Specifications

Details electrical and environmental specifications including power, voltage, noise immunity, vibration, and operating conditions.

Functional Specifications

Outlines program control, I/O processing, instruction set, execution time, memory capacity, and specific device types like counters and timers.

I;O Specification

Memory Map Overview

Special Function Relays

I;O Circuit Details

External Connection Diagram

RS485 Communication

RS485 General Specifications

Details RS485 communication method, station limits, transmission speed, distance, and time-out error settings for SEND/RECV instructions.

RS485 Network System

Illustrates the network system configuration with a master PLC and up to 32 slave PLCs connected via RS485 ports.

Communication Instructions

Dimension and Weight

Other Technical Materials

LG MASTER-K10S1 Specifications

General

Brand	LG
Model	MASTER-K10S1
Category	Controller
Language	English