Why does my LG MC-7683D Microwave Oven seem to be operating but produces little heat?
If your LG Microwave Oven seems to be operating but produces little heat, it could be due to a power source voltage lower than 90% or a defective magnetron. It is suggested the customer contact their local electric power utility company or a qualified electrician. Alternatively, the magnetron can be replaced.
What to do if my LG MC-7683D doesn't operate and the display is blank?
If your LG Microwave Oven isn't operating, the display window is blank, and no input is accepted, it could be due to a defective high voltage capacitor or a defective high voltage transformer. Replacing the high voltage capacitor or the high voltage transformer may resolve the issue.
What to do if my LG Microwave Oven display shows figures but doesn't start cooking?
If the display of your LG Microwave Oven shows all figures set, but the oven does not start cooking when the START pad is touched, it could be due to a defective secondary switch or a defective P.C.B assembly, which should be replaced.
Why is my LG MC-7683D sparking?
Sparks may occur in your LG Microwave Oven due to several reasons: metallic ware touching the oven wall, ceramic ware with gold or silver trimming, or other issues. To resolve this: * Avoid using metallic ware unless specified in the cooking guide. * Do not use cookware with metallic trimming. * Wrap thinner parts of food with aluminum foil, use plastic wrap or a lid, and stir liquids like soup or milk while cooking.
Why is my LG Microwave Oven output power too low?
The output power of your LG Microwave Oven might be low due to low AC input voltage. Ensure you are using the microwave oven at the adequate line voltage. Also, it may not be a defect; the food might just need a longer cooking time.
What to do if my LG Microwave Oven fuse blows?
If the fuse blows in your LG Microwave Oven, it could be due to a defective magnetron thermostat or a defective power supply cord. In this case, the magnetron thermostat or the power supply cord should be replaced.
What to do if my LG Microwave Oven display shows a different number?
If the display on your LG Microwave Oven shows a number or figure different from the one touched, the PCB assembly is likely defective and needs to be replaced.
What to do if my LG MC-7683D inputs cannot be programmed?
If some inputs cannot be programmed on your LG Microwave Oven, the key membrane assembly is likely defective and needs to be replaced.
Why LG Microwave Oven has no microwave oscillation?
If your LG Microwave Oven has no microwave oscillation, even though the oven lamp and fan motor run and the display operates properly, it could be due to a defective P.C.B assembly, a defective high voltage diode, or a defective magnetron. These components should be replaced.
General| Brand | LG |
|---|---|
| Model | MC-7683D |
| Category | Microwave Oven |
| Language | English |
To Next Page
