7
Listening to CDs
Listening to CDs
Pause or restart a CD
Press
BB
/
[]
during playback. Press this button again to resume play.
Search for a section within a track
Hold ./>
on
the player o
r
.bb/BB>
on the remote control during
playback
.
Speed search for tracks
Hold ./>
on
the player o
r
.bb/BB>
on the remote control
only in
stop status
. Track skips continuously in turn.
Skip to another track
Press ./>
on
the player o
r
.bb/BB>
on the remote control
.
Listen to your tracks in any order
Up to 20 tracks on a CD can be listened to in the order of your choice. Insert a
CD and wait for it to be read. Press PROGRAM/MEMO
on the remote control
,
then use ./> on the player
or
.bb/BB>
on the remote control
to
select the track. Press PROGRAM/MEMO again to save and select the next
track. Press
BB
/
[]
. To clear your selection, press
xx
twice .
Listen to your tracks again and again
Press MODE repeatedly, the display changes in the following order, OFF
→
RPT 1
→
RPT DISC
→
RPT ALL
→
RANDOM.
Audio CD and MP3/WMA CD can be played back in this player.
1. Open the CD door:
2. Select the CD tray:
3. Insert the CD: Label facing up.
4. Close the CD door:
5. Select the CD function:
The display will show the total
number of tracks (files).
6. Start the CD playing:
7. To stop a CD playing:
ON PLAYER ON REMOTE
ZZ
OPEN/CLOSE
DISC SKIP
ZZ
OPEN/CLOSE
CD
BB
/
[]
xx
D.SKIP
FUNCTION
BB
/
[]
xx
Listening to the radio
Listening to the radio
Look for radio stations automatically
Press TUNING -/+
on
the player o
r
TUN.- /TUN.+
on the remote control
for more
than 0.5 second. The tuner will scan automatically and stop when it finds a radio
station.
Choose a ‘preset number’ for a radio station
Select a station you want by pressing TUNING -/+
on
the player o
r
TUN.-
/TUN.+
on the remote control
.
Press
PROGRAM/MEMO, the station flashes.
Press PRESET/FOLDER
on the remote control
to select the preset number you
want. Press PROGRAM/MEMO to save it.
Delete all the saved stations
Press and hold PROGRAM/MEMO
on the remote control
for two seconds.
“ERASE ALL” shows. Press PROGRAM/MEMO to erase all the saved stations.
Improve poor FM reception
Press MO./ST. on the player
or
BB
/
[]
on the remote control. This will change the
tuner from stereo to mono and usually improve the reception.
Make sure both the FM and AM aerials are connected.
1. Select either FM or AM:
2. Select the radio station:
3. To ‘save’ a radio station: A preset
number will show in the display.
4. To select a ‘saved’ station:
5. To confirm press: Up to 50 radio
stations can be saved.
ON PLAYER ON REMOTE
TUNER
TUNING -/ +
FUNCTION
TUN.- / TUN.+
PROGRAM/MEMO
PRESET/FOLDER
PROGRAM/MEMO
To Next Page
Loading...
Need help?
General
