GB
Plug your oven into a standard household socket. Make
sure your oven is the only appliance connected to the
socket.
If your oven does not operate properly, unplug it
from the electrical socket and then plug it back in.
Open your oven door by pulling the DOOR HANDLE.
Place the METAL TRAY inside the oven.
Fill a
microwave safe container with 300 ml (1/2 pint)
of water. Place on the
METAL TRAY and close the oven
door. If you have any doubts about what type of container to
use please refer to page 29.
Press the
Stop/Clear button, and press
the
Start button one time to set 30
seconds of cooking time.
The
DISPLAY will count down from 30 seconds. When it
reaches 0 it will sound BEEPS. Open the oven door and
test the temperature of the water. If your oven is operating the water
should be warm.
Be careful when removing the container it may
be hot.
YOUR OVEN IS NOW INSTALLED
The contents of feeding bottles and baby food jars shall
be stirred or shaken and the temperature checked
before consumption, in order to avoid burns.
5
To Next Page
Loading...
