Why is the output power of my LG Microwave Oven too low?
There are a couple of reasons why the output power of your LG microwave oven might be too low. It could be due to a low AC input voltage, in which case you should use the microwave oven at adequate line voltage. Alternatively, it may not be a defect, and the food may simply need to be cooked for a longer time period.
What to do if my LG Microwave Oven has no microwave oscillation even though oven lamp and fan motor run?
If your LG Microwave Oven has no microwave oscillation even though the oven lamp and fan motor run, it could be due to a defective PCB assembly or a defective magnetron. Replace magnetron. It may also be necessary to replace the PCB assembly.
What to do if my LG MS-324DL Microwave Oven sparks?
Sparks can occur in your LG microwave oven if you are using metallic ware or ceramic ware trimmed in gold or silver powder. To prevent sparks: * Do not use metallic ware for cooking, except as noted in the cooking guide. * Do not use any type of cookware with metallic trimming.
What to do if the display shows all figures set, but oven does not start cooking while desired program times are set and START pad is touched in my LG Microwave Oven?
If the display shows all figures set, but the oven does not start cooking when the desired program times are set and the START pad is touched, it could be due to a defective secondary switch or a defective PCB assembly. Replace secondary switch. It may also be necessary to replace the PCB assembly.
How to prevent blown fuse or breaker in my LG MS-324DL Microwave Oven?
To prevent a blown fuse or breaker when using your LG microwave oven, avoid using other electrical appliances at the same time. Inserting many plugs into one outlet and using them simultaneously can overload the circuit.
What to do if the display shows a number or figure different from one touched on my LG Microwave Oven?
If the display shows a number or figure different from the one touched on your LG Microwave Oven, this could indicate a defective PCB assembly. Replace PCB assembly.
What to do if my LG MS-324DL has defective PCB assembly?
If you suspect a defective PCB assembly in your LG Microwave Oven, the suggested solution is to replace the PCB assembly.
What to do if my LG MS-324DL fuse blows?
If the fuse blows, it could be due to a malfunction of the monitor switch, a shorted contact at the primary switch, or a malfunction of the secondary switch. Replace the fuse, monitor switch (with the door closed). It may also be necessary to replace the primary, monitor, and secondary switches, along with the RELAY(RY2) of the P.C.B Assembly.
Details essential safety checks and procedures to prevent exposure to microwave energy during servicing.
Guidelines for personnel safety regarding exposure to microwave energy during operation and servicing.
Procedures and cautions for testing and ensuring microwave leakage levels are within safe limits.
Instructions for removing the magnetron, including important notes on gasket and leakage checks.
Procedure for safely removing the high voltage transformer and its related components.
Instructions for safely removing high voltage capacitors and diodes.
Details on the door lock mechanism, switches, and adjustment for preventing microwave leakage.
Procedure to test the continuity of the primary interlock switch.
Important safety precautions and general checks to perform before troubleshooting the microwave oven.
General| Type | Microwave oven |
|---|---|
| Display Type | LED |
| Turntable | Yes |
| Child Lock | Yes |
| Oven capacity | 32 l |
| Width | 520 mm |
| Depth | 408 mm |
| Height | 311 mm |
| Capacity | 32 l |
| Exterior Dimensions | 520 x 408 x 311 mm |
To Next Page
