Indoor Units
Installation of Unit
Install the unit above the ceiling correctly.
• Apply a joint-canvas between the unit and duct to absorb
unnecessary vibration.
• Apply a filter Accessory at air return hole.
• Install the unit leaning to a drainage hole side as a figure
for easy water drainage.
• A place where the unit will be leveled and that can support
the weight of the unit.
• A place where the unit can withstand its vibration.
• A place where service can be easily performed.
CASE 1
POSITION OF SUSPENSION BOLT
CASE 2
POSITION OF CONSOLE BOLT
10.2 Ceiling dimension and hanging bolt location
(Unit:mm)
 
B3
            850     900    383    575      93     190      21      795    163    820
 
B4
 
1130   1180   383    575      93     190      21     1065   163   1100
Dimension
Chassis
ABCDEFGH I J