Ceiling Concealed Duct(High Static) _ 31
Indoor Units
• A place where the unit will be leveled and that can sup-
port the weight of the unit.
• A place where the unit can withstand its vibration.
• A place where service can be easily performed.
CASE 2
POSITION OF CONSOLE BOLT
10. Installation
10.2 Ceiling dimension and hanging
bolt location
n Installation of Unit
Install the unit above the ceiling correctly.
• Apply a joint-canvas between the unit and duct to absorb
unnecessary vibration.
• Apply a filter Accessory at air return hole.
• Refer to the Dimensions.
• Install the unit leaning to a drainage hole side as a figure
for easy water drainage.
CASE 1
POSITION OF SUSPENSION BOLT
(Unit:mm)
                        A     B     C     D     E     F     G     H      I       J      K     L
         B8 
1622  1565   580    292    695   1400   460   1122  1680    390    445     15
Dimension
Chassis
(Unit:mm)
                         A        B        C        D        E        F       (G)      H         I
         BH  
932        882         355        47         450         30          87         750        158
         BG  
1232      1182        355        47         450         30          87         830        186
 
BR  
1282      1230        477        56         590         30         120       1006       294
Dimension
Chassis