LG MultiSITE CRC1 Series Installation Manual

14
MultiSITE CRC 1 Controller
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
Setpoint Adjustment
Setpoints can be modied in three different ways when in Auto Mode: Cooling
Setpoint change, Heating Setpoint change or Cooling/Heating Setpoint change.
09-26-2017
2:43 PM
Occ Auto Cool
74°
75.0
Cooling Setpoint °F
Humidity
45 %
2:43 PM
Occ Auto Heat
74°
75.0
Heating Setpoint °F
09-26-2017
Humidity
45 %
Cooling mode or cooling only
sequence of operation
In Cooling mode, the setpoint displayed
in the bar is the current occupied cooling
setpoint.
During occupied setpoint adjustment,
the large digits are temporarily used to
display the occupied cooling setpoint
while it is adjusted.
Normal temperature display resumes
after the setpoint is adjusted and the
actual occupied cooling setpoint is
displayed in the setpoint bar.
Heating mode or heating only
sequence of operation
In Heating mode, the setpoint displayed
in the bar is the current occupied heat-
ing setpoint.
During occupied setpoint adjustment,
the large digits are temporarily used to
display the occupied heating setpoint.
Normal temperature display resumes
after the setpoint is adjusted and the
actual occupied heating setpoint is
displayed in the setpoint bar.
CONTROLLER SETUP

LG MultiSITE CRC1 Series Specifications

General

Brand	LG
Model	MultiSITE CRC1 Series
Category	Remote Control
Language	English