Using Multi-Room
16
2
Using Multi-Room
Step 4. Adding Speakers (Optional)
If you connect the initial MUSICow product to your home
network, you can connect the additional MUSICow products
(sound bar, speaker or bridge) to your home network.
Simple Setup Guide (Add Speakers)
1. If you have additional speakers, power on the speaker.
2. Launch smart device or PC application and follow
instructions on set-up wizard.
[Home
à
Add Speakers]
3. Press
button on the MUSICflow product (sound bar,
speaker or bridge) which is you want to connect.
4. Check if F (Function) LED is blinking in a red color.
5. If you installed successfully. Update speaker software to the
latest:
[Home
à
Settings
à
Version Info]
,
Note
If you failed for “Add Speaker” conguration. It seems that
location is too far from between speakers, it may not be
connected. Place and use it at a location that is close enough to
router and each speakers.
NP8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 16 2015-07-27 4:23:59
To Next Page
Loading...
Need help?
General
