4
EN
• If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified person in order to avoid a hazard.
• Appliance shall be disconnected from its power source during service
and when replacing parts.
• Failure to read and follow all instructions in this manual can result in
equipment malfunction, property damage, personal injury and/or death.
• Check that appliance’s voltage level is 90 % ~ 110 % of the rated voltage.
(To check it, refer to the label attached to the side of the appliance.)
• Do not install the appliance on an unstable surface or in a place where
there is danger of it falling.
• This appliance must be grounded. In the event of malfunction or
breakdown, grounding will reduce the risk of electric shock by providing a
path of least resistance for electric current.
• Improper connection of the equipment-grounding conductor can result
in risk of electric shock. Check with a qualified electrician or service
personnel if you are in doubt as to whether the appliance is properly
grounded.
• If the power supply cable is damaged or the cable connection is loose, do
not use the power supply cable and contact an authorized service center.
• Do not connect the ground wire to a gas pipe, a lightning rod, or a
telephone ground wire.
• Do not share the power supply for this unit with other appliances or
devices, it must be a dedicated power source for this appliance.
• Do not modify or extend the power cable.
• Ensure the power cable is secure so that it does not come out while the
appliance is operating.
• Do not touch the power plug or the appliance controls with wet hands.
To Next Page
Loading...
