5
Antenna/Cable
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
• Use a signal splitter to use more than 2 TVs.
• If the image quality is poor, install a signal amplifier properly to improve
the image quality.
• If the image quality is poor with an antenna connected, try to realign the
antenna in the correct direction.
• An antenna cable and converter are not supplied.
• This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts directly
because the related standards have not been confirmed. (Depending
on model)
Other connections
Connect your TV to external devices. For the best picture and audio quality, connect
the external device and the TV with the HDMI cable. Some separate cable is not
provided.
Starting TV
Turning on the TV
You can simply operate the TV functions, using the button.
Power On (Press)
Power Off
1)
(Press and Hold)
Menu Control (Press
2)
)
Menu Selection (Press and Hold
3)
)
1) All running apps will close, and any recording in progress will stop.
(Depending on country)
2) You can access and adjust the menu by pressing the button when TV is on.
3) You can use the function when you access menu control.
Note
• If the TV is turned on for the first time after it was shipped from the
factory, initialization of the TV may take a few minutes.
• Your TV’s OSD (On Screen Display) may differ slightly from that shown
in this manual.
• The device must be easily accessed to a location outlet near the access.
Some devices are not made by turning on / off button, turning off the
device and unplugging the power cord.
To Next Page
Loading...
Need help?
General
