LG OJ45 - Operating; Basic Operations

3 Operating
Operating
14
Operating
3
Basic Operations
CD/USB Operations
1. Insert the disc by pressing B on the remote
control or R on the unit.
Or connect the USB device to the USB port.
2. Select CD or USB function by pressing F.
To Do this
Stop
Press Z on the remote control or
I on the unit.
Playback
Press N on the remote control or
T on the unit.
Pause
Press N on the remote control or
T on the unit during playback.
Searching
for a section
within a track/
le
Press and hold C/V on the
remote control or Y/U on the
unit during playback and release it at
the point you want to listen to.
Skipping to
the next/
previous
track/le
- In stop status,
Press C/V on the remote
control or Y/U on the unit to
go to the next/previous track/le.
- During playback,
Press V on the remote control or
U on the unit to go to the next
track/le.
Playing less than 2 seconds, press
C on the remote control or Y
on the unit to go to the previous
track/le.
Playing after 3 seconds, press C
on the remote control or Y on
the unit to go to the beginning of
the track/le.
Playing
repeatedly or
randomly
Press REPEAT repeatedly, the
display will be changed in the
following order.
ONE ALL SHUFFLE OFF
y When you play programmed list, only ONE
and ALL are available.
y If you leave the disc tray open for 5 minutes,
it will close automatically.
,
Note
Auto Play
- AUDIO/MP3/WMA CD is played automatically
after disc tray is open and then closed.
- Automatically switches to the CD function if disc
tray is open and then closed when there is no disc
in disc tray.