Operating30
Operating
4
Basic Operations on
USB
1. Connect the USB device to the USB port.
2.
Select USB function by pressing F.
To Do this
Stop Press
Z
.
Playback
Press X on the remote control or
N on the unit
Pause
Press M on the remote control or N
on the unit.
Scanning for a
section within
a le
Press and hold C/V or c/v
on the remote control during
playback and release it at the point
you want to listen to.
Selecting a le
directly
Press 0 to 9 numerical buttons on
the remote control to go to the
desired le directly.
Skipping to
the next/
previous le
- In stop status,
Press
C
/
V
to go to the next/
previous le.
- During playback,
(1) By using
C
/
V
buttons:
Press
V
to go to the next le.
Playing in less than 3 seconds, press
C
to go to the previous le.
Playing after 3 seconds, press
C
to
go to the beginning of the le.
(2) By using SEARCH:
Rotate Multi jog or
C
/
V
and
press
X
on the remote control or
N
on the unit to play the le.
Playing
repeatedly or
randomly
Press
h
REPEAT on the remote
control repeatedly. Refer to the note
for details about the display change.
y Repeat/Shufe playback operates as follows.
On Diplay Description
OFF
Plays songs in order, and stops
the playback.
ONE Plays a same song repeatedly.
FOLDER
Plays songs in a folder
repeatedly.
ALL Plays all the songs repeatedly.
SHUFFLE
Plays all the songs once
randomly, and stops the
playback.
y When you play JUKEBOX list, only ONE and
ALL are available.
y Even after restarting the unit or switching
one function to another, you can listen to
music from the point where it’s last been
played.
y USB function is only avaliable on music
playback.
,
Note