To Next PageTo Next Page
Need help?Do you have a question about the LG OTW420B and is the answer not in the manual?
General| Mounting type | Wall |
|---|---|
| Minimum VESA mount | - mm |
| Minimum screen size | - \ |
| Maximum weight capacity | 32 kg |
| Panel mounting interface | 400 x 200 mm |
| Product color | Metallic |
Weight and Dimensions| Depth | 17 mm |
|---|---|
| Width | 445 mm |
| Height | 319.2 mm |
| Weight | 2700 g |
Product must be installed by qualified personnel to prevent injury.
Contact qualified installer for moving or replacing the product.
Avoid hanging power/signal cables on TV back to prevent fire/shock.
Ensure product is installed where weight is fully supported to prevent falls.
Protect product from severe impacts after installation to prevent falls.
Adhering to manual instructions prevents incorrect installation and damage.
Verify wall strength and use specified anchors/screws for safety.
Install or adjust height with two or more people to prevent falls.
Use specified drill bit diameter and depth for correct installation.
Mount only on concrete walls; not liable for other materials like wood, brick.
Check screw length if guide spacers are not fully tightened.
Assemble guide spacer and screw as shown, ensuring tight fit.
Secure guide spacers to TV with screws, tightening fully.
Check wall material (concrete, stone, brick) and thickness.
Use anchors for concrete, stone, brick; avoid plasterboard/MDF without support.
Use Ø 8 mm drill bit for concrete, drill depth 80-100 mm.
Clean hole and insert anchor using a hammer.
Hang display on bracket, attaching lower part first, then upper part.
Lists model name, dimensions, weight, VESA specs, and tensile load.
