LG PF510Q User Manual

58
ENGLISH
Adjusting AV Synchronization
(Q. Settings) → → [Sound] → [Advanced Settings] → [Match Screen and
Sound]
Adjusts the synchronization of the sound from the speaker that is working.
The closer the value is set to 60, the slower the voice output speed will be than the
default speed.
If you select the [Bypass], Outputs the sound from external devices without any audio
delay. The audio may be output before the video because of the time the projector
takes to process the video input.
• The adjustable items vary depending on [Sound Out].
[Select HDMI Input Audio Format]
(Q. Settings) → → [Sound] → [Advanced Settings] → [Select HDMI Input
Audio Format]
You can set the audio format for each HDMI input. When the voice delivered through
the HDMI port is not synchronized, set it to [PCM].
[Sound Mode Share]
(Q. Settings) → → [Sound] → [Advanced Settings] → [Sound Mode Share]
Plays the sound mode applied to the projector speakers on the soundbar, or selects the
sound mode of the soundbar on the projector to play.
• [Off]
Turns off the [Sound Mode Share].
• [Enjoy Projector Sound Mode]
The [Sound] → [Select Mode] set on the projector is applied to the soundbar to
deliver a variety of sounds.
• [Enjoy Soundbar Sound Mode]
You can set the sound mode of the soundbar in [Sound] → [Select Mode] on
the projector.
– The name of the sound mode displayed on the soundbar may differ from that
of the [Sound] → [Select Mode] on the projector, depending on the model. In
this case, it will be matched with the sound mode with similar effects.

LG PF510Q Specifications

General

Resolution	1920 x 1080 (Full HD)
Brightness	450 ANSI Lumens
Contrast Ratio	100, 000:1
Light Source	LED
Throw Ratio	1.2:1
Display Technology	DLP
HDR	HDR10
Operating System	webOS
Power Consumption	65W
Lamp Life	Up to 30, 000 hours
Connectivity	Wi-Fi, Bluetooth
Keystone Correction	Vertical ±40 degrees
Inputs/Outputs	HDMI, USB
Audio Output	5W speaker