LG PF510Q User Manual

85
ENGLISH
Troubleshooting Sound Issues
Please check the list below when you experience the following symptoms during use of
the product. It may not be a failure.
First of all, perform (Q. Settings) → → [Support] → [Sound Self-diagnosis] to
check for any abnormalities in the projector.
If you are using a set-top box, turn it off, and then turn it back on.
Make sure that the set-top box is correctly connected to your projector.
Thescreenisne,butitdoesnotplayanysound.
• If you use a set-top box, there will be no sound if you have set the volume of
the set-top box or your projector to 0 or enabled Mute. Set the volume to an
appropriate level.
• (Q. Settings) → → [Sound] → [Sound Out]
Set [Sound Out] to [Use Projector Speaker] and check again. If you can hear the
sound normally, check the connection of the external speaker such as the sound
bar and the settings of the external speaker.
There is no sound coming from one of the speakers.
• (Q. Settings) → → [Sound] → [Advanced Settings] → [Balance]
Adjust the balance as necessary with the Navigation button in [Balance].

LG PF510Q Specifications

General

Resolution	1920 x 1080 (Full HD)
Brightness	450 ANSI Lumens
Contrast Ratio	100, 000:1
Light Source	LED
Throw Ratio	1.2:1
Display Technology	DLP
HDR	HDR10
Operating System	webOS
Power Consumption	65W
Lamp Life	Up to 30, 000 hours
Connectivity	Wi-Fi, Bluetooth
Keystone Correction	Vertical ±40 degrees
Inputs/Outputs	HDMI, USB
Audio Output	5W speaker