LG PF510Q User Manual

84
ENGLISH
I see vertical lines in the left, right, top, and bottom corners of the screen, or
colors are blurred when I try to connect to HDMI.
• (Q. Settings) → → [Picture] → [Aspect Ratio] → [Just Scan]
Set [Just Scan] to [Off].
[Just Scan] shows you the original image as it is. If the signal contains noise,
noise may be seen in the left, right, top, and bottom corners of the screen.
Idon’tseeanything,ortheimagekeepsickeringwhenItrytoconnectthe
HDMI cable.
• Check whether your HDMI
®
cable is compliant with the specifications. You may
experience flickering or a blank screen if the HDMI
®
cable is faulty (bent, broken).
• Make sure that the cable is correctly connected to the port. Bad or loose contact
may cause display problems on the screen.
The screen looks too dim or dark.
• (Q. Settings) → → [Picture] → [Select Mode]
Switch [Select Mode] to your desired picture mode. ([Standard], [Vivid], etc.)
This applies only to the current input mode.
• (Q. Settings) → → [General] → [Energy Saving] → [Energy Saving
Step]
Switch [Energy Saving Step] to [Minimum].
The screen is in black and white or displaying strange colors.
• Check the input mode or cable connection.
• Go to to choose the connected input.
• Check the [High Contrast], [Grayscale] and [Invert Colors] settings.

LG PF510Q Specifications

General

Resolution	1920 x 1080 (Full HD)
Brightness	450 ANSI Lumens
Contrast Ratio	100, 000:1
Light Source	LED
Throw Ratio	1.2:1
Display Technology	DLP
HDR	HDR10
Operating System	webOS
Power Consumption	65W
Lamp Life	Up to 30, 000 hours
Connectivity	Wi-Fi, Bluetooth
Keystone Correction	Vertical ±40 degrees
Inputs/Outputs	HDMI, USB
Audio Output	5W speaker