LG PH4R User Manual

Getting Started8
Getting Started
1
Charging the Unit
Connecting the AC adapter
This device uses built-in battery. Before using it,
charge the battery by connecting the AC Adapter.
1. Connect the supplied USB cable to the AC
adapter.
2. Connect the USB cable to USB port of the unit.
3. Plug the AC adapter into an AC outlet.
(Not supplied)
If the battery is fully charged in charging mode,
LED is changed from red to white.
AC adapter is not supplied.
It is recommended that you use the 5 V AC
adapter approved by LG Electronics Inc. (more
than 1.8 A) with this unit because of danger of
explosion. If you do not use the recommended
adapter, charging is unavailable or charging time
may differ.
>
Caution
Checking the charging status
When AC Adapter is connected, battery charging is
started. You can check the charging status by
LED .
LED Description
White
Red
Battery is fully charged.
White
Red
Battery is charging.
y
Operating time is approx. 10 hours. (Based
on fully charged the battery and continuous
playback using 50 % volume level.)
It may vary depending on the battery status
and operational conditions.
y
If you listen to the music while charging, it will
take longer to charge.
,
Note
Checking Battery status
If the power turned on, you can check the charging
status by pressing
1/!
button. Then LED light
will change depending on battery charging status.
LED Condition Status
White
Amber
Amber
Battery LED turns
on white.
60 %
15 %
15 %
White
Amber
Amber
Battery LED turns
on amber.
60 %
15 %
15 %
White
Amber
Amber
Battery LED blinks
amber with the
sound.
60 %
15 %
15 %

LG PH4R Specifications

General

Brand	LG
Model	PH4R
Category	Speakers
Language	English